Home > Products > HA-PT Pyrolysis Plant > HA-30-PT pyrolysis plant

HA-30-PT pyrolysis plant

ItemNo.: HA-30-PT
Base on the latest technology and decades of years’ producing experience, RESEM designed HA-PT series pyrolysis plant. HA-PT series has completely overcome the vertical flat bottom cracking processor problems of uneven heating, easy to fracture and lower yield. Its unique Oil tank&Spray cooling system makes HA-PT series widely used in pyrolysis industry.
If you have additional questions, please contact us.
Final Products:
Raw Material Oil Rate Steel Carbon Black Gas
Tires 45%-50% 15%-20% 30-35% 4%-10%
FUEL OIL (40% to 45%)
The main oil product produced by our recycling application is the fuel oil that is wide used for industrial and commercial purposes. The oil has 40% to 45% of the amount of recycled scrap tyres, which will be carried with licensed tanker trucks.
CARBON BLACK (30% t0 35%)
Carbon Black is the main product recycled by Pyrolysis technology. The amount of recycled carbon black is 30% to 35% (depending on the type of tyres) of the total amount of scrap tyres recycled in the system. Carbon black is used as raw material or main ingredient in many industries and the chemical structure of carbon black strengthens, lengthens the endurance, and improves the coloring features of the materials.
STEEL WIRE (10% to 15%)
Tires contain steel wires and the amount range of 10% to 15% of thetotal tyre wastage. All of the steel present in the tyre can be detached after the Pyrolysis recycling process is completed. Valuable steel wires are pressed and sold to steel and scrap dealers.
GAS (4% to 10%)
Non-Condensable gases arise during the pyrolysis process. There aresome advantages such as ...
  1. lt has higher calorific value as compared to natural gas.
  2. It can be replaced where natural gas and propane are stored.
  3. The high energy gas may be utilized as a source of energy for the Pyrolysis process.
  4. The amount of gas generated in the system is 12% to 15% of the total amount of recycled tyres and considering the 10 ton scrap tyre/day recycling capacity, the facility generates 1200 -1500 m3/day gas, which has an enormous energy potential when evaluated.
safe:
  1. We use auto welding machine to make the reactor, which has a long life for about 5 years.
  2. Professional heating treatment and x-ray detection chamber for welding seam.
  3. With professional thermometer, professional pressure gauge and safety valve.
  4. One water sealing tank to stop the fire coming back to the oil tank.
  5. Three temperature meters and three safety valves on the reactor door, the oil separator tank, the water sealing tank.
  6. One central control cabinet, giving alarms when temperature or pressure has something wrong. If nobody releases the gas for long time after the alarm, the safety valve will release itself to make sure of the safety.
Energy saving:
  1. Well sealing for heating system, no gas leak and saving fuel.
  2. The exhaust gas will be recycled for reactor heating.
  3. Continuous feeding with automatic feeder, no gas leak.
Environmental friendly:
For the waste gas:
  1. The gas from reactor:This kind of gas is produced in reactor which contains Sulfur dioxide. We can use Emission Controller to process this kind of gas and then discharge it.
  2. Non-condensable gas:One ton fuel oil can produces 70kg non-condensable gas which is combustible.
For the waste water:
  1. Only few waste water will be produced during the production,normally we add some Alkaline solution, but that is the simple solution.
  2. For better results,we could add some Calcium carbonate,then we will get the Plaster,it can be sold as Building Materials. Also,we could add Sodium hydroxide,then we will get Sodium sulfite,it is kind of the
Get Price And Support

With more than 15 years professional experience in pyrolysis plant, we dedicate ourselves to creat wealth for you! You can contact us online or send e-mail to sales@pyrolysisplant.net to order RESEM product.


Offer
When we get your information, we will contact you within 24 hours. At this stage, our sales man and engineer will identify all details with you and help you find the best solution together.

Acceptance
After good communication, both the design that meet your requirements and the best price that we can offer you will be show you. If there are not any problems, OK, we can sign the contract.

Shipment & Installation
We will produce all machines that promised you in the contract for you and arrange the shipment when they are ready. Also, our engineers will be dispatched to your country to help you install the machine until the plant work well.